Новый ISPSoft 3

ambi
Сообщения: 21
Зарегистрирован: 22 янв 2014, 14:30
Откуда: Минск

Re: Новый ISPSoft 3

Сообщение ambi »

and909 писал(а):
22 фев 2022, 18:48
У Дельты стало нормой выкладывать новые релизы без описания багфиксов, изменений и нововведений.
С чего это? Вон, выше я вкладывал ревизион хистори на 3.14, не думаю, что нынче не так.
Я, видимо, не совсем верно выразился.
Я имею в виду, что помимо файла инсталяционного пакета в Download-центре ранее всегда был файл Revision History,
и можно было глянуть, стОит ли качать новую версию.
Сейчас, пока не скачаешь полтора гига архив, не узнаешь, что внутри...
Это не есть гуд.

Я, собственно, и ориентировался на Ваш пост, думая, качать-не качать... Спасибо! :)

ambi
Сообщения: 21
Зарегистрирован: 22 янв 2014, 14:30
Откуда: Минск

Re: Новый ISPSoft 3

Сообщение ambi »

bayk писал(а):
23 фев 2022, 09:50
в самом исп вверху в меню инфо есть пункт revision history. та. все багфиксы.
Угу, только как прочитать revision history версии 3.15, из меню Инфо моей версии 3.12? ;)

and909
Сообщения: 858
Зарегистрирован: 28 май 2013, 13:20

Re: Новый ISPSoft 3

Сообщение and909 »

Version: 3.15
Date of Publication: Dec. 30, 2021

1. Now you can see all supported EDS parameters on the Device Parameter page of
EtherNet/IP Slave and by ticking the items, you can select the items to upload or
download.
2. Added a new function to use values in the contacts of the function blocks VAR_INPUT
and VAR_OUTPUT from the program.
From the example below, you can see the value in the contact of the function block
VAR_OUTPUT is read directly from the program and no need to output the value before
using it.
3. Added a new function to auto allocate addresses for devices D, M, T, and C so that the
global symbols can be used by Delta HMI software for declaration.
Select the devices that you need to auto allocate and right-click on the global symbol main
table to see the option. Select the option “Auto Allocate D/M/T/C Address” and devices are
auto allocated by their types, for instance, BOOL will be allocated in the range of M devices,
Counter in the range of C devices, Timer in the range of T devices, and the rest in the range
of D devices
4. Card Utility now supports the following modules
5. New function blocks are added for AH Motion Series PLC CPU in Delta Library.
Added 8 new function blocks, including DFB_SP_CalsliderHeight,
DFB_SP_CamCoinCurve, DFB_SP_CamCrankCurve, DFB_SP_CamCurveWrite,
DFB_SP_CamLinkCurve, DFB_SP_CamPendulumCurve,
DFB_SP_CamPulse1Curve, and DFB_SP_CamSlavePoint in the group of DELTA
LIB\ServoPress for AH Motion Series PLC CPU in Delta Library. Press F1 function
button in Delta Library to open the descriptions on the mentioned new function blocks
from ISPSoft
6. The following issues are fixed and functions are modified:
(1) Now the Delta DDF files can be imported to HWCONFIG. (DDF files should be acquired
from Delta product department.)
(2) Added a new column, No., on all the symbol tables. Users can tell how many symbols
are declared from this column.
(3) The column “Data Type” is added on the IO-Link parameter setting page.
(4) Fixed an issue that switching to different AH PLC CPU in the project, the data exchange
table may not be able to restore correctly.
(5) Changed the trigger mode setting rules in EtherNet/IP data exchange parameters. Now
the trigger mode setting rules can be set according to the EDS file from the Slave.
(6) Enlarged the Instance and Config size in EtherNet/IP General Device data exchange
setting page.
(7) Fixed an issue that if the remote device is set to Delta Robot Series, the data exchange
cannot be uploaded properly.
(8) Fixed an issue that if using EtherCAT for the first time and generating an ENI file without
creating any Slaves first, an error will occur.
(9) Fixed an issue that if configuring MDP devices in EtherCAT and then executing I/O
Mapping, the result may not be accurate.
(10) Added a new procedure in compiling: checking the range of the array index value to
prevent any error that may occur when there is a BOOL type member used in DUT.
(11) Russian is added for language selection.
(12) Now enumeration can be used in the index value of array typed symbols. For
example, for (TYPE color:(red, green); END_TYPE), now you can use
myArray[color.red] instead.
(13) Optimized the display of strings in the program: hover your mouse cursor over the
string to see a full string information.
(14) Optimized the time it takes to open the Used Device Report page.
(15) Fixed an issue that an error will occur in the contact n of the MEMW or MEMWP
instruction during compiling if the value used is a constant.
(16) Fixed an issue that when the project is ES3 series PLC CPU, if entering
D10.0@E0 in the Ladder programming language, the 0 behind the decimal point
will disappear right after editing.

Олег
Сообщения: 795
Зарегистрирован: 18 янв 2011, 23:06

Re: Новый ISPSoft 3

Сообщение Олег »

(14) Optimized the time it takes to open the Used Device Report page.
Т.е. это нормально заработало?
Пойду качать.

and909
Сообщения: 858
Зарегистрирован: 28 май 2013, 13:20

Re: Новый ISPSoft 3

Сообщение and909 »

Включил Русский, выглядит страшно непривычно, чувствуешь себя не в своей тарелке, вернусь на инглиш, пожалуй)

ambi
Сообщения: 21
Зарегистрирован: 22 янв 2014, 14:30
Откуда: Минск

Re: Новый ISPSoft 3

Сообщение ambi »

and909, спасибо за Revision History!
А Вы не могли бы выложить оригинальный PDF, полагаю для пункта 2 там есть поясняющий рисунок.

Не совсем понял, что имеется в виду в пункте 3.

Расположение внутренних docked-окон в проекте также не запоминает?
И при открытии проекта автоматом открывает "полезную" библиотеку Delta справа? :)

pkl
Сообщения: 1468
Зарегистрирован: 23 ноя 2010, 10:08

Re: Новый ISPSoft 3

Сообщение pkl »

https://www.dropbox.com/s/vjdln179h828a ... N.pdf?dl=0
Не влазит сюда.
И при открытии проекта автоматом открывает "полезную" библиотеку Delta справа?
да.
Если кто уже юзает новую версию 3.15, проверьте у себя: в режиме мониторинга в таблице мониторинга не показывает текущие значения D-регистров. Или это только у меня глюк такой? Независимо, на симуляторе или реальном контроллере.
У меня всё показывает.

bayk
Сообщения: 887
Зарегистрирован: 30 май 2015, 21:20

Re: Новый ISPSoft 3

Сообщение bayk »

and909 писал(а):
23 фев 2022, 15:34
Включил Русский, выглядит страшно непривычно, чувствуешь себя не в своей тарелке, вернусь на инглиш, пожалуй)
а я как буд-то всю жизнь на русском работал. так приятно и органично его вписали. прям даже глаз не режет.

pkl
Сообщения: 1468
Зарегистрирован: 23 ноя 2010, 10:08

Re: Новый ISPSoft 3

Сообщение pkl »

Есть недостатки.
Безымянный.png
Безымянный.png (170.53 КБ) 1935 просмотров

bayk
Сообщения: 887
Зарегистрирован: 30 май 2015, 21:20

Re: Новый ISPSoft 3

Сообщение bayk »

у. пня вин7 х64 такой беды нет, но может я когда-то давно корректировал кодовую страницу??

Ответить